V2018.3 Multi-Diag Access J2534 Programmer J2534 Pass-Thru OBD2 Device Support Multi-Language

V2018.3 Multi-Diag Access J2534 Pass-Thru OBD2 Device Support Multi-Language. With the help of Multi-Diag Office software vehicle diagnostic, maintenance and repair operations can be done in just a few clicks without being an electronic expert.

UKOBD2 Provide top quality V2018.3 Multi-Diag Access J2534 Programmer J2534 Pass-Thru OBD2 Device Support Multi-Language, if you need V2018.3 Multi-Diag Access J2534 Programmer J2534 Pass-Thru OBD2 Device Support Multi-Language, or have any questions about V2018.3 Multi-Diag Access J2534 Programmer J2534 Pass-Thru OBD2 Device Support Multi-Language, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of V2018.3 Multi-Diag Access J2534 Programmer J2534 Pass-Thru OBD2 Device Support Multi-Language

V2018.3 Multi-Diag Access J2534 Pass-Thru OBD2 Device

Top 4 Reasons to Get Multi-Diag J2534:

1. Newest Version: V2018.3
2. Languages: Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Hebrew, Hungarian, Italish, Polish, Portuguese, Romanian,Russian, Serbian,Slovenian, Spanish, Swedish, Turkish.
3. This version Multi-diag J2534 Resolved NO VCI FOUND problem!
4. No Need Activation, support part of the cars to year 2018

Notice:
VCI Number: 093479
V2018.3 Multi-Diag Access J2534 Description:

Access J2534 Pass-Thru Device is a VCI (vehicle communication Interface), with the help of Multi-Diag Office software vehicle diagnosis, maintenance and repair operations can be done in just a few clicks without being an electronic expert. It covers more than 45 brands, a lot of new vehicles, a large deepness in diagnostic functions.

V2018.3 Multi-Diag Access J2534 Characters
  • Compliant to SAE J2534 & J2534-1
  • Either RS 232 or USB interfaces to PC
  • K-Line ISO 9141 (100 mA)
  • KWP 2000 ISO 14230-4
  • SAE J1850 PWM
  • SAE J1850 VPW
  • CAN 2.0B ISO 11898
  • CAN ISO 15765-4
  • SCI SAE J2610
  • Programmable power supply
  • On-board memory

Multi-Diag Access J2534 Interface Functions:

After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):

1. Maintenance
Diagnosis codes from all computers
Reset maintenance interval
Modification of the sewage
Read / erase fault calculators
Maintenance of the particulate filter

2. Air Conditioning
Diagnosis of cooling electronic
Reading settings cooling circuit
Test servo actuators

3. Pollution control
Diagnosis of the particulate filter
Electronic control of pollutant emissions
Control of the Lambda probe

4. Liaison to the ground
Electronic configuration of the size of tires
Electronic configuration of tires (winter / summer)
Setting valves tire pressure
Diagnosis and management of shock-driven
Calibration of the sensor angle Driving (initialization of the steering angle)

5. Body
Implementation of safety airbags (lock / unlock)
Reconfiguration of a new calculator Airbag
Diagnosis of calculators Airbag
Rain sensor windshield (reading and erasing fault)
Test panel and activators of lights
Setting Xenon headlights
Rear radar

6. Post-Equipment
Setting up the radio
Configuration loader CD
Setting alarms
Configuration of the coupler
Configuration bicycle loading system

7. Braking
Diagnosis of calculators ABS, ESP
Diagnosis and unlock electric brakes
Flush the brake system

8. Motor
Diagnosis of any calculator injection engine (diesel, gasoline, flex fuel, etc.)
Program of injectors
Electronic configuration of the EGR valve

9. Expert Mode
Diagnosis of advanced computers
Configuration of comfort functions
Change the language of the instrument panel
Physical measures (option with a probe - not supplied)
Direct access to all functions of diagnosis

V2018.3 Multi-Diag Access J2534 Connection Picture:



V2018.3 Multi-Diag Access J2534 Software:




Package includes:

1pc x VCI (Vehicle Communication Interface)
1pc x DB25 to OBD-2 Male Cable
1pc x OBD2 Male to OBD2 Female Cable

Go to Buy: V2018.3 Multi-Diag Access J2534 Programmer J2534 Pass-Thru OBD2 Device Support Multi-Language

Tags: J2534 Programmer, multi-diag access , multi-diag J2534 , multi-diag access j2534 , j2534
Prev: Oemscan GDS + 3 Professional Diagnosis Tool Support online Update
Next: Original xmar mvci 3 compra sp70b en la última versión v1030.029